Rycote InVision 6 suspension

Rycote InVision 6 suspensionRycote InVision 6 suspension, 2x 19 25mm universal standard lyre, 72 shore, standard bar Suitable for short small diaphragm condensor microphones of 19 to 25mm diameter such as the Sennheiser MKH 8020 40 50 and Schoeps CMC1U. The mount features a pair of Single 72 (19 25) Lyres. Part of the InVision range of noise reducing microphone shock mounts, these mounts are also designed for discreet, low profile use in on location or broadcast studio

Dugan Automixing/MixAssist for up to 8 channels

-2dB@18kHz) for a very efficient protection to light winds

SDI input to HDMI output conversion

significantly reducing the preparation time before you start shooting

encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base

You can use an ERX to listen to the mic right on the spot

and regardless of whether you’re behind a drum kit

skin-safe material

Compact design with sleek and stylish finish

safe and reliable

1 Frequency selection 20 discrete channels Diversity method antenna switching RF Modulation proprietary digital method URX50-L Tuning Range 500 – 638 MHz URX50-H Tuning Range 542 – 698 MHz RF Frequency Step 100 KHz RF Signal Bandwidth 200 KHz Channel Separation 300 KHz (300Khz to 500kHz Transmission / Modulation dependent) Sensitivity -100 dBm RF channel voting 2 or 3 channel auto selection Modulation decode Mono

Most common menus are accessible with only one or two button presses