Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K

Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850KThermocouples are very sensitive, requiring a good amplifier with a cold compensation reference. So far we've carried the very nice MAX31855 which is an SPI interface thermocouple amplifier. The '855 is great but if you have a lot of thermocouples to measure it isn't terribly easy to use. That's why we are also carrying the new '850 model from Maxim it's a "1 Wire" thermocouple amp which can have any number of breakouts on a single shared I O line.

Compatible: Raspberry Pi

Low consumption current (Icc: MAX

This all in one module is the simplest we could find

Initial Brightness: 40 cd/m2

Please note this chip requires repeated-start I2C support (in case you are looking to port this to another processor)

We've seen such tape used for EMI shielding

5VDC power requirement (do not exceed 6VDC) - no polarity protection

All you have to do is look through the top-down viewfinder and focus using the ring on the lens

3V regulator and logic-level shifting circuitry

The 2 Grove interfaces are respectively screen-printed “IN” (for controlling data input) and “OUT” (for controlling data shared with the next strip driver)

Laser cut acrylic casing with four screws

or just some awesome cosplay