Shuttle Flow Switch Liquid / Water / Oil - Bronze - 1100 Series

Shuttle Flow Switch Liquid / Water / Oil - Bronze - 1100 SeriesOur model 1100 Series Liquid Shuttle Flow Switch for Liquid, Water, Oil, etc series is an Industrial Standard that sets the bar for other units to be ranked against. True globe shaped housings yielding lower pressure drops, one piece cast bodies to achieve pressure capabilities unheard of in the industry, among other reasons as to why our units are the standard to compare others to. Youll find these units commonly in the HVAC, Machine Tool, and Marine

ensuring optimal performance and safety

Wide Operating Range: These indicators thrive in diverse environments

no need to un-plumb/ remove the body from the line

Flows above the set point pass by the shuttle without issue holding the unit actuated until the flow rate begins to decrease where the spring begins to push the shuttle back down to resting position until the magnet extends far enough away from the switch causing it to de-actuate

The switch is rated for maximum resistive load of 20 VA and can be used with a pilot voltage of 120-240 VAC

To adjust flow set point

that the relay resets back to its original electrical state

All information on the Model 2001 can be found in the catalog sheet below

5 GPM indicators must be installed horizontally in a vertical pipe run with the flow direction up

Description: The 1300 Series Right Angle Shuttle Flow Switch Series for Liquid

Teflon factory coated floats are available

Product Notes