2003-2024 4th/5th Gen 4Runner Panhard Correction Kit (PCK)®

2003-2024 4th/5th Gen 4Runner Panhard Correction Kit (PCK)®The Original PCK Weld on bracket kits to correct the Panhard bar angle on 2 4. 5" of lift. The Panhard Correction Kit returns the panhard bar to horizontal (per the original design), eliminates the need for an aftermarket adjustable panhard bar to recenter the axle, and, in most cases (up to 4 inches of lift), raises the roll center for improved handling (a 4 4. 5 inch lift maintains the roll center of an adjustable panhard). Includes: (1) Lift

We've cut the forward edges of the bumper back and angled them appropriately to allow you fully stuff a 315 up to the short factory bump stops

an additional EVAP lift kit will be needed (see the drop-down menu below)

Important notes:

This fuel tank lift kit isn't the easiest thing to install out of my product line (getting the existing tank crossmember out of the frame is tedious

) It requires removing the bed and notching the bed supports (I include weld-in notch plates for this)

We have tapered the front of the bumper to just wider than the body itself to keep it narrow for tight trail work

A lower link limit strap tab and shock bolt that clears 2

1875") Steel

The LSR also includes a pair of replacement bolts & washers

(1) Lift Bracket

GX) when coming down hard on a rock - the factory mount is way down there and relatively unsupported - and consequently

I decided to pursue caster correction by lowering the frame side radius arm mount by the same 50mm to return both the caster and the anti-dive to factory specs