Brightside Polyurethane Marine Enamel Light Blue 946ml

Brightside Polyurethane Marine Enamel Light Blue 946mlA hard, high gloss topside finish, Brightside Polyurethane creates that sprayed on look when applied by brush in thin coats. It can be used anywhere above the true waterline, its easy to clean, resists staining and has great abrasion resistance. Good to know An excellent high gloss, hard one part polyurethane finish Its fluro microadditive makes it easy to clean, stain resistant and gives it added abrasion resistance Comes it a stunning range of

Invisible Glass evaporates 100% and contains no dyes

• Cures quickly to a sandable state (no sanding required between coats when recoating within 72 hours)

watertight barrier

Will not remove barrier coats

5 gallons of epoxy

Mistake-Proof Application - Application is as simple as peeling off the release liner and pressing firmly onto a clean

Make sure that your boron rods contain disodium octaborate tetrahydrate (DOT) and not a less effective substitute

Body Double® "Standard Set" and Body Double® "Fast Set" are long lasting skin safe lifecasting silicone rubbers that can be applied directly to the skin to make molds of the face

mixing sticks and containers

The molds you make from Mold Builder can be used to cast paper

9 inches when fully expanded

protecting wood from decay and insects