090: 4-14S HYB-BEC / 12.0V

090: 4-14S HYB-BEC / 12.0VThis BEC is a switching power supply and in series, a linear LDO (LM1764A) to remove the ripple. Due to the component selection, this BEC gets only warm during operation (LDO only 0. 35V dropout voltage). Input and output are protected by Panasonic FC FM capacitors. Input 4 14S LiPo max. 60V . Output 12V 3A > + 0. 05V. 54mm x 21mm x 14mm 16g with cables and shrinking tube.

3V / 5A power supply for Flight Controller

So please select the matching BEC according to your preference from the BEC section

The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC

or 4 -> Output 1 can't be changed and must remain 5

4 pole cable with DF-13 connector

neither a shared bus nor trim pins on the supply are required

39mm x 31mm x 6mm / 7g without cables

-> Min input voltage 3V higher than the output voltage

Input voltage up 60V

60V) with transient spikes of max

User-Manual: DOWNLOAD

Voltage range is up to 28S (120V) with solder bridge open and up to 7S (30V) with solder bridge closed