Carbon Type B (15-25nm) with Formvar on TEM Grids

Carbon Type B (15-25nm) with Formvar on TEM GridsA Formvar film coated with a heavier layer of carbon. This is the strongest and most versatile support film we produce. It is stable in the EM under all operating conditions including high magnification with high beam intensity. The films can withstand vigorous specimen preparation techniques. If the carbon surface is hydrophobic, specimen suspensions can be applied to the Formvar surface. 150 Mesh 200 Mesh 200 Mesh Micron Reference 300 Mesh 400 Mesh

Pin is centered

The AutoGrid Tweezers are designed to handle the Thermo Fisher/FEI AutoGrids

45° and 90°

Can be stored vertically on a shelf and fits into standard 3-ring binders

Use single or dual wider posts for attaching single lamellas or the four posts for attaching a larger number of lamellas

with a Ø1mm tip

Hex key is included

The PELCO® R2 Rotator has rubber cushioned feet on the bottom as well as on the back so it may be placed on either of two angles

(1) Syringe Stand (#83075-1)

76260-20 PELCO® Pin Mount Starter Kit

The PELCO® Abrasive Dispenser can also be used in manual mode by dispensing the desired amount of suspension using the control panel or a foot switch (included)

Pin mount adapters