Amana Tool 49704 Carbide Tipped Plunging Round Over 3/8 Radius x 1 Inch Dia x 5/8 x 1/2 Shank

Amana Tool 49704 Carbide Tipped Plunging Round Over 3/8 Radius x 1 Inch Dia x 5/8 x 1/2 ShankThis bit creates a flat bottom groove between two quarter round shapes. Short vertical walls extending below the radius lend extra depth to the appearance. Depending upon the cut depth adjustment, the radii can be flush with the work surface or recessed. The profile can be formed on an edge using an edge guide or, on the router table using a fence.

It cuts 3/8" wide and up to 1/2" deep

The deep guide collar design adds stability to the tool for hand-held router operations

Must be used with an edge guide

This bit is designed to produce a T-slot for Amerock® hinges

Switch from fluting to beading by raising or lowering the bit

The pilot bearing allows you to make template-guided cuts with the bit

and convenient means of storing

the template is on top

Wood 4 3/4" (120 mm) Power Consumption 400 Watts Stroke Length 1" Stroke Speed 500 - 3

Larger diameter cutters will work in edge-guide or template-guide equipped handheld routers

Made of durable

Carbide tipped spoilboard surfacing & rabbeting router bit great for cutting tight corners and surface planing