2.5" OD CAN Pipe x 8'-0" w/Hole

2.5" OD CAN Pipe x 8'-0" w/HoleThis 2. 5" OD aluminum tubing is commonly used as a leg for the Festival CAN W frame tent system. The tubing is drilled with parallel holes measuring 7 16" diameter 4" from each end of the tube. Specifications: Base Material: 2. 5" OD 6061 T6 Structural Aluminum Tube, ID 2. 300", OD 2. 500", and a 0. 100" wall thickness Finish: Anodized Commercial Clear

It is used on all sizes from Festival CAN-W frame tents from 10' wide up to 20' wide

The long end of this ratchet strap is sewn to a 1-1/2" diameter steel ring that allows it to be hooked over the tensioning nub on the baseplate

Rigging regardless of load should be evaluated by a structural engineer for each application

with 1" spacing between heads

The XL Rolling Canopy Jack 13'8"h is built for frame systems with leg height between 9'0" and 12'0"

847"OD pole pin measuring 10" in length

Jumbotrac Lite

It is used on all widths of hip ended traditional frame tents from 10' wide up to 40' wide

The 1/4" diameter double braided nylon rope is fed through a 3/8" Rope (Dog Bone) Slider and includes a spring snap carabiner to attach to the valance tension ring and a wire formed "S-Hook" to connect to the baseplate All hardware is zinc plated steel

The 11mm Keder Leader Set is utilized to reduce the wear and tear on the leading keder edge of kedered roof panels that use 11mm keder

The tubing is drilled with parallel holes measuring 7/16" diameter 4" from each end of the tube

The internal dimension (ID) of the pipe section is 1