C4Labs Zebra Zero Plus for Raspberry Pi Zero

C4Labs Zebra Zero Plus for Raspberry Pi ZeroWrap your new little Raspberry Pi Zero in protective and elegant wooden plates with the Zebra Zero Plus! The Zebra Zero Plus includes a breadboard for prototyping making this a nice and full on prototyping platform for you and your Pi Zero. There's also a GPIO pin header reference chart etched on the back for reference. As is the case with all of our favorite enclosures, all of the pins on the Pi are easily accessible from the top! We also have the

Open Source

The BLE part is built on the Nordic nRF51822 with Bluetooth Low Energy 2

As the rotor spins due to water flow

Slow start limits inrush currents UVLO protection

two 12 pin 0

Dimensions (no headers or terminal block) 2

Use a 500mA-capable 5V USB port or you can cut the USB power cable and re-wire to another 5V source

Monitor your plants or exotic pets

simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving

Portable RetroPi with the smallest Pi yet

check the tutorial for details

has on-board interface phototransistor to read data from the built-in LEDs of different counters and interface RS485