Amana Tool 54121 Carbide Tipped Ogee Raised Panel 7/8 Radius x 3-3/8 Dia x 9/16 x 1/2 Inch Shank

Amana Tool 54121 Carbide Tipped Ogee Raised Panel 7/8 Radius x 3-3/8 Dia x 9/16 x 1/2 Inch ShankCreate raised panels for cabinet doors, frame and panel furniture, and architectural paneling with a raised panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1 2" shanks. Must be used in a table mounted 3+ horsepower router and run at reduced speed. Use these bits for

Pockets & Tool Holders: 12

The tool is equipped with a ball-bearing guide for template work

Internal "flush pin" for zero distance measurements with plumb line flush with surface

Crimping pressure has been set precisely (calibrated) in the factory

use the three-flute version

Comes stock with the 2003 - Oxy Tool Shield™

choose the three-flute configuration

This one bit is designed to cut more than 40 different molding patterns

the two pieces should slide together with their faces perfectly flush

Cutting mortises for hinges and locks can be challenging

picture frames

washers and shims