40-pin FPC Extension Board + 200mm Cable

40-pin FPC Extension Board + 200mm CableGive your 40 pin, 0. 5mm pitch, devices a strrrreeeetch with this extension board. This 40pin FPC extension board has two 40 pin flex connectors (both are bottom contact type), and an extension cable to add ~22cm (20cm cable plus 2cm board) Each order comes with one board a 20cm long, 40 pin 0. 5mm pitch FPC cable and board. Works great with our 40pin TFTs! Technical Details 18mm x 34mm x 4mm 0. 7" x 1. 3" x 0. 2" Cable Length: 200mm 7. 9" Board

LED String

This enclosure was designed by Mike Doell

The emitters of the  lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor

After installing our software (details below)

the former is a high performance camera processor with enhanced image processing functions and it embedded the hard-wired JPEG codec

Included on the fully assembled breakout is the OLED display and a small boost converter (required for providing 12V to the OLED) and a microSD card holder

This version has a one meter NeoPixel strip with a black flex PCB

and TELEC certified

Unassembled board dimensions: 65

CW signal generator at any frequency in the range

as well as

2017 the board has been updated to change the USB-Serial converter chip to CP2104 and remove the SWD connector (you can get to the SWD connection pads on the bottom of the PCB)