Raymarine 5M Backbone Cable f/SeaTalkng [A06036]

Raymarine 5M Backbone Cable f/SeaTalkng [A06036]Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone

Flexmount Blowers are built to the same high specification as the Heavy Duty Flangemount Blowers for use as air intake or extraction systems in engine rooms

for mast mounting

5″ (127 mm) Open Face Dial

25" woofer

Standard meter operates in negative side of circuit only

The Auto Guidance feature¹ uses your desired depth and overhead clearance to calculate a route and a suggested path to follow

Cable Lug Size: 1/2"

Typical power consumption is less than 1

Included Propeller: MKP-32

URC-102 Master controller

8084 AC Main +6 Positions/DC Main +15 Positions Toggle Circuit Breaker Panel - White Switches

Charger Input - Voltage: 120v