Throttle Body Bypass Kit

Throttle Body Bypass KitIn stock applications hot engine coolant is routed through the throttle body during normal operation. With this modification the throttle body is bypassed lowering intake temperatures and allowing denser air to enter the engine. This provides a slight increase in engine performance. Try it today!

we had some important criteria we wanted to achieve

Designed to be used with the factory vertical side pieces and may also be used by itself

This effectively means there is half the physical time between exhaust pulses exiting through this runner which provides a smooth continuous flow of exhaust gases

above the airbag

This upgrade provides more midrange and high rpm power while still remaining a bolt-on unit

such as the Cobb-AP

The bushing are available in either red or black

By eliminating this deadheading effect of the charge air the turbo spins at higher rpm in a partially spooled state similar to the secondary turbo on an FD RX-7

At high vehicle speeds they open

Over shifting is shifter travel greater than required to engage the gear which can cause serious damage to internal transmission components such as synchronizers

The Syncro-Saver when installed properly will eliminate the additional excessive travel of the shifter with a definitive shifter stop which in turn will eliminate the binding of components inside the transmission

for street applications we recommended the use of the sprung disk kit