DuraTech Class A Anchor Plate 5" to 8"

DuraTech Class A Anchor Plate 5" to 8"The DuraTech Class A Anchor Plate is used when connecting DuraTech chimney pipe to either a prefab zero clearance or a masonry fireplace. The Anchor Plate is the starter section that will mount directly to the exhaust hole of the fireplace and transition to the DuraTech Chimney Pipe. Once the Anchor Plate is mounted to the fireplaces, then you can simply start connecting the pipe sections. Note: When using DuraTech Chimney Pipe with a pre manufactured

Secure with the wing nut as shown

Available in a 6 inch model only

This little wonder provides an 18 inch offset / extension

A powerful 144 CFM blower is included to help push the heat across the space

Windsor Magnum Smooth Chimney Pot Measurements

The thermal sensor capabilities of the Draw Collar will save on energy consumption and costs

is sold separately

The Dover Clay Chimney Pot comes standard in a beautiful & natural clay

Built with durability and heating power in mind

Pellet Vent Siding Trim Kit

Having more that 5 feet of the Pellet Pipe above the roof line can cause the pellet vent to be unstable

below the flat ceiling and is capable of supporting up to 35 ft