Ford Fiesta ST180 Boost Tap

Ford Fiesta ST180 Boost TapBoost Tap for Ford Focust ST 180 (Mk7). This adaptor plate installs between the boost (MAP) sensor and mounting surface. This allows a tap to run a vacuum operated valve or for connection to a boost gauge. When running this tap you are also able to retain your original engine cover. In the box: 1 x Vacuum tap 1 x M6x20 Allen Cap Bolt 10 x Cable Ties 1 x 2000mm of 4mm Vacuum Tube

Hyundai Elantra

0T Volkswagen Tiguan 1 4 Motion 2

​​​​​​Fitting this part increases the airflow into the turbo by replacing the restrictive plastic OEM turbo inlet pipe

but do not typically because placement of multiple smaller nozzles produces superior results

the FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak

Fitment FWD:

Using a stiffer spring to keep the valve closed at a vacuum condition may result in too stiff of a spring tension to effectively discharge pressure at a throttle lift condition

Significant power gain of over 9bhp engine power and 7nm of torque

EACH CONNECTING ROD SET IS BALANCED TO WEIGHTS WITHIN +/- 1 GRAM

Keeps your engine reliable for upgraded turbos and superchargers

SPEC will not be liable for any damage or injury to persons or property that might be claimed as a result of improper installation or misuse of any part subject to this warranty

all IE heat shields are finished with a classy