Amana Tool 55380 Carbide Tipped Classical Reversible Stile and Rail Assembly 1-5/8 Dia x 11/16 x 1/2 Inch Shank

Amana Tool 55380 Carbide Tipped Classical Reversible Stile and Rail Assembly 1-5/8 Dia x 11/16 x 1/2 Inch ShankCut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each setup is shown in the drawing. Use in a table mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Should be used in a table-mounted router

Replacement non-slip adhesive strips for FS Guide Rails

and add an elegant detail simultaneously with these bits

The LEDs sync to the speed of the blade

The covetto form – produced by the cove bit – is one of the classic building blocks for many molding profiles

Crimping pressure has been set precisely (calibrated) in the factory

provide a clear and voluminous sound

The motor utilizes a dual-stack ring system where the outer ring is designed to minimize internal friction

A preliminary cut with the overhang bit leaves a small overhang in laminate or template work

the bit produces a fillet at the base of the bead

This ingenious tool features both interchangeable cutting edges and an interchangeable guide collar

it can handle stock between 7/16" and 1-3/8" thick