JT Lite JT2 9' 4" w/ Flare

JT Lite JT2 9' 4" w/ FlareThis kedered aluminum tubing is used in the Jumbotrac Lite frame tent system for legs. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button and an additional hole in the center of the extrusion. Specifications: Base Material: 2. 72" x 2. 06" JT2 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and a 0. 125" wall thickness

and (1) squaring card

Breaking strength of the strap assembly is 10

This is a rafter intermediate eave fitting for the 50x Jumbotrac hip ended frame tent design

The system features High Density Urethane wheels to feed the keder material into the aluminum tracks of the beam without jamming and binding

The long end of this rope tensioner is left cut to length to allow for the appropriate loop to be tied in a location suited for the leg height All hardware is zinc plated steel

The operational length for this strap is intended to be anywhere from 6' to 14'

The frame seat is ideal for ballast footprints measuring 40" x 20" & 20" x 20"

(1) 20x30 1pc Qwiktop Frame Tent Top

5" Schedule 40 6061-T6 structural aluminum pipe

Forged from 3/4" diameter high tensile alloy steel

Straps shall expire 5 years from the date of their manufacture (noted on the item tag) and shall not be used

The internal dimension (ID) of the pipe section is 1