Dual Latching Footswitch with LEDs

Dual Latching Footswitch with LEDsThis pedal is a dual latching footswitch for switching channels effects on an amp that takes a dual latching footswitch with a stereo 1 4" TRS cable. Each footswitch has an internal slider switch to let you set the LED state to the correct state for the function it's footswitch is switching. The left switch is wired to the tip connection of the stereo TRS output, the right switch is wired to the ring. The LEDs are powered by an internal 9v battery

Each pair of sockets can be used as mono or stereo and are isolated to avoid ground loops

Open it with the corresponding button

If you need to include a pair of TRS cables you can order them from our cable section

The stubby 30mm high BOP Block risers are 20mm shorter in depth than the standard BOP Blocks

the insert loop will not be bypassed by the Master Bypass as so will always be in the signal path

With this setup you plug your guitar directly into the first pedal on your pedalboard

you can add a Bright Onion TRS cable to the order above

The pedal uses relay switching so your guitar signal is remains passive

Select your preferred option when ordering

Cable required - Mono TS

Earthquaker Devices pedals

A socket will be added to the rear of the looper with a toggle switch to let you set the correct polarity for the status LED