Terra Cotta Top Plate Rigid 6 x 8 x 13 - Clearance

Terra Cotta Top Plate Rigid 6 x 8 x 13 - ClearanceThe Rigid Terra Cotta Mount Top Plate 6" x 8" 13" is used if you have clay tile in your chimney and it's exposed by 1 2 or more at the top of your chimney. The top plate will pressure bolt to the outside of the protruding clay flue tile. Made with stainless steel. 2" collar height. Sold as is, non returnable.

Baron Chimney Pot Measurements

Burn time up to 8 hours with a single load of wood

No Noxious Odors

Elbows rotate 360° to provide the exact orientation required

A storm collar & silicone is required to seal around the top of the flashing around the pipe to make the entire system water tight

Cannot be used for horizontal installations

The Fox wood stove is compact and will only take up to 10 square feet of floor space

Note: Due to custom fabrication

The connection collar will take the correct form once the compression sleeve is inside a pipe

broad spectrum air damper

The clean out of the tee will mount to the underside of the tee support so you can easily access the bottom of the tee for the cleanout

allowing you to crimp one end to make it a male pipe end depending on which way you are pointing the adapter