AutoGrid De-clipping Tool

AutoGrid De-clipping Tool47000 606 The AutoGrid De clipping Tool is used to de clip and recover a TEM grid from an AutoGrid ring. Normally clipping a grid into an AutoGrid is considered a permanent modification, but this tool allows the grid to be safely removed and used on both AutoGrid and non AutoGrid based systems. An AutoGrid is slid into the dovetail of the tool under liquid nitrogen using a set of AutoGrid Tweezers (#47000 600). Then, using a Hook Micro Tool (#13688B)

75 kHz +/-15 kHz Force Constant 3 N/m 1 - 7 N/m Length 225 µm +/-10 µm Mean Width 28 µm +/-5 µm Thickness 3 µm +/-1 µm Tip Height 17 µm +/-2 µm Tip Set Back 15 µm +/-5 µm Tip Radius <10 nm (Multi75

Prod # Description 5002-40

Wire is embedded in PVC hose

Tested Aluminum/

PM40 (#549-PM-40)

Widely used for holding semiconductors

PELCO® Cylinder Mount Grippers for 25mm dia

Can be supplied unmounted or mounted on an SEM stub of your choice

ceramics and other non-porous materials to similar materials or to glass

0 x 10-10 <4

Standard warning labels for use at ambient temperatures

The UltrAuFoil® grids were designed by Drs