4.5" to 4" ID Short Radius - Gloss Black

4.5" to 4" ID Short Radius - Gloss BlackThis short radius reducing silicone elbow is 4 1 2" ID on one end and 4" ID on the other end. Short radius and short leg means it fits in tight quarters, such as on turbochargers or superchargers. Temp rated to 350F continuous. Five ply reinforced silicone for high strength. We now recommend all silicone elbows be 5 ply or better. Thick 7 32" to 1 4" wall construction. Recommended clamps are 94100 0450 on the small end and 94100 0500 on the big end.

Recommended clamps are 94100-0350

This standard 4" 90-degree air intake elbow is used where you need to join two 4" OD tubes

1x90* reducing angles (4" to 3

the other end goes on 2-1/4" OD tubing

Recommended clamps are 94100-0875

This 5" to 5" charge air cooler hose has reinforcing stainless steel rings to help the hose keep its shape and handle more pressure under high temperature conditions

This 5 inch to 3-1/2 inch reducing silicone coupler is 3 inches long

Recommended clamps are 94100-0238 on the small end and 94100-0338 on the big end

This 4 inch to 3-1/4 inch reducing silicone coupler is 3 inches long

This short-radius reducing silicone elbow is 4-1/2" ID on one end and 4" ID on the other end

Fits on some LS1 MAF's

The weave is twill