Linear Ball Bearing Pillow Block IPPSN24G 1.50" Open - Self Aligning Precision Plus

Linear Ball Bearing Pillow Block IPPSN24G 1.50" Open - Self Aligning Precision PlusOpen Linear Ball Bearing Pillow Block with a 1. 5" ID (inner diameter) inside a housing made of aluminum alloy. The Precision Plus series is self aligning due to a crowned bearing shell inside the housing. The IPPS products all come with a grease zerk fitting, a small hole in the pillow block which is also called a lubrication port. Temperature Range: 4 +176F ( 20 +80C) Variant ID Sizes: Available from 1 4" to 2 Inch Series, 8mm to 50mm Metric

with a 20mm precision ID that provides a 0

Double Plain Linear Bearing of 50mm JIS Metric ID with a round flange (end-mounted) and a compensated running clearance of 0

with a 1" ID (inner diameter) crown shelled bearing inside an aluminum alloy housing

Closed shell plain linear bearing with a JIS 50mm ID

0015" running clearance per side on matching round shafts

case hardened carbon steel

Double Plain Linear Bearing of 10mm JIS Metric ID with an end-mounted square flange and a compensated running clearance of 0

with a 2″ ID (inner diameter) and a precision running clearance of 0

Matches Hevi-Rail Linear Rail HVR-1 U-Type or HVRI-07 I-Type

Double Plain Linear Bearing of 25mm JIS Metric ID with a Square Flange (end-mounted) and a precision running clearance of 0

with a 1/4" precision ID that provides a 0

Thin Wall Plain Linear Bearing with a compensated 50mm ID (inner diameter)