3.25" to 3" ID Gloss Black - 4.5" leg length

3.25" to 3" ID Gloss Black - 4.5" leg lengthThis 90 degree silicone elbow is 3 1 4" ID on one end and 3" ID on the other, with a 4 1 2" leg length on both ends and can be used anyplace you need a reducing 90 degree bend. Handles 350F continuous and is perfect for intercooler aftercooler and turbocharger applications. Five ply reinforced silicone for high strength. We now recommend all silicone elbows be 5 ply or better. Thick 7 32" wall construction. Shorter 4. 5" leg lengths. Recommended

This 90 degree silicone elbow is 2" ID and can be used in air intake systems and charge air cooler systems operating at 350F or less

Cobra head elbows are used when clearance is extremely limited

9 BAR Minimum Bend Radius (90°) 35mm

Recommended clamps are 94100-0325 on the small end and 94100-0338 on the big end

This reducing insert adapts a 4

and then the 2

and then the 6" intake tube fits in the hole

You can install it without trimming these ends

Need a little bend in your sleeve

065 wall thickness

1/2" External Diameter 16mm

Handles 500 degrees F